Description
Note: I am down to the final panels. I will not be making another run of these, so when these are gone, this product will no longer be available.
The membrane panel with the switches that enable the various features and pull up the presets is a known weak spot of the ARP Quadra, and many otherwise good Quadras have been turned into expensive doorstops due to failed membrane panels. These are brand new (manufactured in 2020) membrane panels that look just like the originals! Great for bringing back to life an otherwise unusable Quadra, or to keep as a spare just in case someday your membrane panel fails.
This panel connects to the Quadra Microcomputer board via 2 flex cables, like the original. There are 2 versions of the microcomputer board–one that accepts 10 pin flex cables, and another that accepts 15 pin flex cables. This membrane panel is a drop in replacement for the board with a 10 pin connector. The panel should still work with the board with a 15 pin connector, but you or your tech will need to make some modifications to route the flex cable wires to the correct lines.
The panels are long and are shipped flat and well packed, so shipping carriers’ dimensional weight rates apply.
Reviews
There are no reviews yet.